Gadgets(5) - Rendering a wired speaker(earphone) a Bluetooth capability 2

Rendering a wired speaker(earphone) a Bluetooth capability 2

Yet-TR6.

Previously it has been used for RX Bluetooth connection with wired speakers. And the resulting sound involved some noises obviously.
Now here again will we give a non-Bluetooth sound output device a Bluetooth capability without noises in its output sound.

The details are as follows:
A due requirement for it is a Bluetooth signal Receiver(RX) gadget.

Essager's Bluetooth 5.0 receiver is being used here. Unlikely the previously used one it does not accompany any noise. It transfers crystal clear sound almost.
It implements RX mode only but with a quality assurance, surely.

And as it requires no external power supply source it can be safely used not only with speakers but also with an earphones/headphones.

Now again let's give a wired non-Bluetooth earphone True Wireless Stereo Bluetooth capabilities.
Here we go~!

Prerequisites

Any audio player device that has a Bluetooth feature so that it may connect a Bluetooth audio output device to itself wirelessly. Mobile smart phones are OK, for example. Here we will use a Samsung Galaxy Wide 2 as a reference.

Essager Bluetooth receiver gadget and a wired earphone.

Wired speaker set

The Specifics

1. First, connect the earphone to the gadget's audio inlet. and power it on as shown below:
   
2. Then the gadget's small blue LED blinks signaling it is ready for BT connection and pairing. Make sure the gadget is properly charged beforehand.
3. Turn on a desired cell phone and goto Bluetooth settings to turn on its Bluetooth feature.
   The label of this connection is [BT001]
   Tick Connect and confirm its pairing message to finish the connection:
   
       
   After a successful connection, play music with a music player app from the phone.
4. As one could see from the result ,this gadget does not involve any noise at all, even with earphones, if properly configured and connected.

   Additionally, it does not require any external power source as it is powered by its rechargeable in-house battery, thus portable.
   

   A sort of classic wired earphone and just the Essager gadget consist a perfect portable Bluetooth system.
   Its sound quality is also appealing.

5. Done!
   That's all for it.
   Enjoy listening to the clear music without any noise via the now Bluetooth-capable speakers or an earphone!

Caution !

The author hereby clearly enunciate that any error, damage or loss to the reader arising from the reader's tasks by following this tutorial is assumed by the reader.

In no cases would the author be held responsible for such occurrences, damages or loss of whatsoever.

So, please be careful following and performing any task based on this article.

BTW, thanks for reading it. Have fun!

Job Done !

Enjoy your task!

Previous : Rendering a wired speaker(earphone) a Bluetooth capability

Next : Cables talk for electronic charging performance

---

EOD

---